#41
|
|||
|
|||
Re: failsafe problems
Next week except Wednesday?
After 11am til 3pm?
__________________
Richard L aquamist technical support |
#42
|
|||
|
|||
Re: failsafe problems
Ok thursday or friday will probably be best for me, would 2pm give you enough time?
Or is earlier easier for you? Thanks again |
#43
|
|||
|
|||
Re: failsafe problems
This is perfect. 2 pm is good.
__________________
Richard L aquamist technical support |
#44
|
|||
|
|||
Re: failsafe problems
Ok great, I'll find out tomorrow for sure but looks like friday at two will work for me
|
#45
|
|||
|
|||
Re: failsafe problems
Ok, Friday it is.
__________________
Richard L aquamist technical support |
#46
|
|||
|
|||
Re: failsafe problems
System seemed to work well on way back, had to turn gain cw and thres ccw to stop failsafe light illuminating upon activation.
Thanks again, let me know what you find out about my board |
#47
|
|||
|
|||
Re: failsafe problems
Instead of thres ccw, you can ccw WL. Makes sense?
__________________
Richard L aquamist technical support |
#48
|
|||
|
|||
Re: failsafe problems
Will be working on the original board tomorrow. Very strange.
__________________
Richard L aquamist technical support |
#49
|
|||
|
|||
Re: failsafe problems
WL is already fully CCW, I well spend some time setting trims up properly this weekend
|
#50
|
|||
|
|||
Re: failsafe problems
There are a few updates since the HFS3 V1.
One in particular is the lower WL span limit. The latest HFS3v2-v3 failsafe has been extended so you can set the WL much lower. It is due to some users wanted to inject from quite early and using very large fuel injector in case they run E85. So you may need pay us another visit or send the gauge to us so we can update the WL adjustment span.
__________________
Richard L aquamist technical support |
|
|