waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-07-2019, 04:39 PM
BMC123 BMC123 is offline
Junior Member
 
Join Date: Sep 2016
Location: canada
Posts: 8
Default Need help setting up Aquamist to run based on boost alone

I have a 2013 Mazdaspeed 3 that is built and fully bolted (425ish WHP). I'm running the Aquamist HFS4-v3.1 using 2 jets, a .8 and a 1. Both of these feed into a spacer on the throttle body. My tuner (Freektune) advises that he prefers to set up his tunes running water/meth injection based solely off of boost. He has asked that I set up the system to start water/meth flow at 10psi and be running full at 15psi. Can you suggest how I might achieve that with any degree of accuracy? It appears that the Aquamist system is biased toward running off of IDC. The kit is fully installed, it's just the jumper-links and trim that are causing the confusion. I find portions of the instruction manual to be ambiguous. Thanks in advance.


initial installs - all COBB; FMIC, Accessport V3, SF Cold Airbox, Short Ram Intake, Turbo Inlet Hose, 3" SS Downpipe, 3" SS Cat-back Exhaust, Rear Motor Mount, XLE BPV, Polyurethane Exhaust Hangers. Autotech Fuel Pump Internals, Greddy catch can, Freektune.

Most recent installs/swaps; BNR S4 , HTP 3" intake kit, , TIG intake to head, CPE EGR delete, Swift lowering springs, rear camber arms, CPE 75 duro driver and passenger mounts, ProMeth Tank, Aquamist HFS-4 V-3 w/m injection kit (to combat our absolutely garbage, 91 octane), (.8 & 1.0 jets), vent gauge pod, Nitto NT05s

Built Motor - Manley H-beam rods, Wiseco pistons and CS cams, balance shaft delete

Last edited by BMC123; 06-07-2019 at 07:00 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:12 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.