waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Competition Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 31-07-2018, 02:10 PM
Ragnar Ragnar is offline
Junior Member
 
Join Date: Feb 2018
Location: Belgium
Posts: 1
Default Rally car with air restrictor : IDC or MAP ?

Hello guys,

I'm building my next rally car and it's time for me to choose a water injection system but I don't know what input is better for my application : IDC or MAP

It's a Peugeot with a 1600 thp engine and direct injection.

The car will make about 280 hp with a 34 mm air restrictor. With this restrictor, the engine will reach its max boost pressure just before 3000RPM, the pressure (and the torque) will then decrease until 6500RPM.

The goal is to have max power from 3000 to 6000 RPM.

If I'm right, IDC will approximately be the same at 3000rpm with max boost pressure and at 6000rpm (low boost and maybe no water injection needed at this point).

From what I think, MAP based injection seems to be more suited for my application.

Am I right ? If not, could you please explain me ?

Many thx guys !
Reply With Quote
  #2  
Old 08-01-2019, 12:55 PM
Wolf_Tm250 Wolf_Tm250 is offline
Member
 
Join Date: Nov 2006
Location: Parma - Italy
Posts: 33
Default Re: Rally car with air restrictor : IDC or MAP ?

Quote:
Originally Posted by Ragnar View Post
Hello guys,

I'm building my next rally car and it's time for me to choose a water injection system but I don't know what input is better for my application : IDC or MAP

It's a Peugeot with a 1600 thp engine and direct injection.

The car will make about 280 hp with a 34 mm air restrictor. With this restrictor, the engine will reach its max boost pressure just before 3000RPM, the pressure (and the torque) will then decrease until 6500RPM.

The goal is to have max power from 3000 to 6000 RPM.

If I'm right, IDC will approximately be the same at 3000rpm with max boost pressure and at 6000rpm (low boost and maybe no water injection needed at this point).

From what I think, MAP based injection seems to be more suited for my application.

Am I right ? If not, could you please explain me ?

Many thx guys !
What about Fuel Injection Time in ms?
__________________
Wolf_Tm250 [Silat-Kali lover]
TM enduro 250cc 2stroke
Toyota Celica Gt-Four ST205 Snowy White[2.34kg/hp]
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:19 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.