waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > In Cylinder Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2005, 02:50 PM
ka24det ka24det is offline
Junior Member
 
Join Date: Feb 2005
Posts: 3
Default WI inside the exhuast Manifold ?

I've read an article about to inject water inside the exhaust manifold to create more stream while cool down the exhuast tempature and create more stream to spool up the turbo at low end, any expert on here heard of that? input and share what you got would be nice .


Thanks
Carlos
Reply With Quote
  #2  
Old 03-02-2005, 06:44 AM
PuntoRex PuntoRex is offline
Senior Member
 
Join Date: Mar 2004
Location: Taiwan
Posts: 75
Default

Just some thoughts:

1. Temp at exhaust manifold is very high, the nozzle/hose & water in them might be heated up so high & already vaporized before injection. The upstream pump might also be affected by the high temp when the water is not flowing. (Don't tell me it's gonna be injected continuously.)

2. Anything which is added into the exhaust manifold would increase the back pressure seen by the cylinders/pistons. So VE would suffer.

3. Cooling the exhaust gas also decrease the volume & pressure we need to drive the turbine. Maybe the added water can overcome this by vaporizing during injection. But it's hard to deploy & manage.

....
__________________
'97 Fiat Punto GT
Reply With Quote
  #3  
Old 03-02-2005, 09:02 AM
ka24det ka24det is offline
Junior Member
 
Join Date: Feb 2005
Posts: 3
Default

Thank you for the reply,
I just learn alot of stuff on here everyday.



THank you again!

Carlos

Quote:
Originally Posted by PuntoRex
Just some thoughts:

1. Temp at exhaust manifold is very high, the nozzle/hose & water in them might be heated up so high & already vaporized before injection. The upstream pump might also be affected by the high temp when the water is not flowing. (Don't tell me it's gonna be injected continuously.)

2. Anything which is added into the exhaust manifold would increase the back pressure seen by the cylinders/pistons. So VE would suffer.

3. Cooling the exhaust gas also decrease the volume & pressure we need to drive the turbine. Maybe the added water can overcome this by vaporizing during injection. But it's hard to deploy & manage.

....
Reply With Quote
  #4  
Old 11-09-2008, 07:48 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default

http://www.msdpowersports.com/pwc_waterinjection.html
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:12 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.