waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

Reply
 
Thread Tools Display Modes
  #1  
Old 30-05-2019, 11:07 PM
Autosri Autosri is offline
Junior Member
 
Join Date: Aug 2011
Location: Leicester
Posts: 3
Default Jet size and quantity for N54

Hi I’ve just picked up my new car and it’s got an N54 engine I’m looking to get around 450hp out of the stock turbos and keep a decent intake temp

I’ve got a bit of a mish mash system I removed from my old car I’d like to reuse for a while it’s a 250psi pump with the relief style regulator and a home made arduino base controller
On my last car I used a 0.5mm jet with a 50/50 mix just as a safety margin

I’m looking to install this kit onto the new car but I’m not sure what size Jets to run of how many as it’s direct injection so can’t use the total injector and 15-20percent method

Also is it better to run one big jet or 2 smaller ones for the best atomisation


Thanks
Reply With Quote
  #2  
Old 10-06-2019, 08:08 AM
rotrex rotrex is offline
Senior Member
 
Join Date: Jan 2014
Location: Germany
Posts: 188
Default Re: Jet size and quantity for N54

At this power level, I’d consider running 6x checkvalved 0.4mm jets in a direct port fashion with 50:50 mix. Flowwise the same rules apply.
Just ensure that the jets blow near the intake port into the runner and from the top.
The mist won’t take turns very well.
You would have to retune at this flow level.

If you don’t go direct port, you might follow BMW’s own route and install 3 jets in the plenum chamber. The runners are pretty straight in these engines. This helps the mist actually arriving in the cylinders.
Reply With Quote
  #3  
Old 20-11-2019, 01:23 PM
HenryM HenryM is offline
Junior Member
 
Join Date: Jul 2019
Location: Seoul
Posts: 5
Default Re: Jet size and quantity for N54

Quote:
Originally Posted by rotrex View Post
At this power level, I’d consider running 6x checkvalved 0.4mm jets in a direct port fashion with 50:50 mix. Flowwise the same rules apply.
Just ensure that the jets blow near the intake port into the runner and from the top.
The mist won’t take turns very well.
You would have to retune at this flow level.

If you don’t go direct port, you might follow BMW’s own route and install 3 jets in the plenum chamber. The runners are pretty straight in these engines. This helps the mist actually arriving in the cylinders.
May I ask why the jets should spray from the top?
What's the downside of spraying from the bottom?
All direct port adapter plates for N54/N55 are designed to spray from the bottom because there's no space on the top.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.