Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 26-06-2010, 06:28 PM
playback playback is offline
Join Date: Jun 2010
Posts: 32
Default Re: HFS3 initial setup query post install

Originally Posted by Richard L View Post
May be send me a picture of the undwrside of the circuit board and see if thay have configured the system correctly. Different models of direct-injection car has many variations feven from the same manufacturer.

Can you tell me the volatge reading of test pin16 at idle, cruising and WOT. Simple voltage test would be seeing a voltage spike when blipping the throttle.

Ask the shop to contact via email richard@aquamist.co.uk Unfornately I am away this weekend.
Will try get this info for you. Do u mean pic of the underside of the aquamist board where u make the adjustments ?

Test pin 16 at idle... um where would I find this pin ? And how could I measure the voltage on it... VAG Com or a multimetre ?

Thanks again for the help.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.