waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

Reply
 
Thread Tools Display Modes
  #31  
Old 20-11-2019, 07:46 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Default Re: RX7 rotary power, meth or water?

First run of the day always on the initial application with the air pockets being compressible result in a high reading on the indicated water flow rate (~22% above normal flow range), this then after ~0.5 seconds (air bubbles gone) is back to normal.

NOTE: Never found it in reality being a problem, even on more knock sensitive engines, it does not show up on traces for this first initial application anyway (car has to sit over night to develop them). So its a non issue. I don't know what others do? but every car I look after has Life Racing based ECU with per engine cycle per cylinder constant knock logging and we don't see any ill effects.

On that note you do know when the WI system is not set up right, so on a quick transient reapplication especially when running 36psi on a rotary engine on the street with pump petrol, you can have the engine controller shutting things down if the knock level gets too high to preserve the parts in that chamber.

All in all though, as stated that question of yours I hope I explained is not a problem in reality, it does not trip to open flow limit in the Aquamist which defines if you have a leak in the system, and it has no end effect seen on knock level either, not from what I have seen anyway. Based on ~50,000km testing on multiple cars over 3 years or so, all running on knock limit and over turbo speed limits 'highly stressed'.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #32  
Old 11-12-2019, 11:06 PM
Rub20B Rub20B is offline
Junior Member
 
Join Date: Jan 2013
Location: Belgium
Posts: 9
Default Re: RX7 rotary power, meth or water?

Efr91 or 83 on this car? Damn moves (Y)
Reply With Quote
  #33  
Old 03-06-2020, 03:20 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 511
Exclamation Re: RX7 rotary power, meth or water?

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:33 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.