#1
|
|||
|
|||
Nissan Pulsar GTI-R
Hi,ive only just joined this site,i hope ive posted this in the right section! :? ,anyway ive got the chance of an ERL water injection kit for my GTI-R,i know very little about this sort of thing and would appreciate any feedback on it please,has anyone fitted it to the GTI-R?,if so pics would be great,thanks
Car is runnig around the 300hp mark,with,exaust,filter,walbro pump,1 bar boost.
__________________
True to its rally roots,the GTI-R spends more time off road than on it!!. |
#2
|
|||
|
|||
The Above!!!
Thanks for all the great input and info guys!!,must say you really have helped!,22 views and not a thing,what a crap forum.
__________________
True to its rally roots,the GTI-R spends more time off road than on it!!. |
#3
|
|||
|
|||
I can only apologise.
If you have Aquamist related questions, please post to ERL/Aquamist section. I visit there every day.
__________________
Richard L aquamist technical support |
#4
|
|||
|
|||
Re: Nissan Pulsar GTI-R
I know this is an old thread, and I'll trawl through the other sections in time, but I might also have GTi-R specific questions.
I've bought a second-hand Aquamist 1S (maybe? Really basic, probably a group-buy on the Owner's Club a few years ago), and I'm trying to work-out what I need to do/buy to get the most from it:
I guess those aren't all GTi-R specific, but I have honestly been trying to think before I post so that it doesn't just sound like "tell me how to do it". Last edited by PobodY; 21-04-2012 at 03:08 PM. Reason: Looked more closely at what I've got. |
#5
|
|||
|
|||
Re: Nissan Pulsar GTI-R
Right, I've been recalculating:
4x444cc injectors. Use the 15% figure so I'm at the top of 100% water and the bottom of 50% Gives me ~290cc/min 1.2 bar ~ 17.5psi My base pressure is 100psi on the 1s So my x-axis is ~83psi I want one jet that's between a 0.8mm and a 0.9mm? ...or do I want a 0.6mm before the plenum/intake maifold and a 0.3mm just in front of the turbo? - I like the idea of improving the compressor efficiency, and it seems to me that a smaller injection is less likely to give the big droplets that may damage the blades. I think I'm going to need some spare parts to put this together? - With all due respect, can I just order the hoses and quick-fit connectors from John Guest? That's where I get similar plumbing fittings for my fridge. |
|
|