Mitsubishi EVO (JDM) wiring diagrams for HFS-3 (all non-US models)

[Richard L]

I will be working towards compiling wiring diagrams for as many makes of cars as possible for the HFS-3. I, of course need help from all your guys who owns the car to supply me as much information as possible, with feedback.

I would be grateful if you guys can post some installation images and share the experiences with others.

Richard

[Richard L]

http://www.aquamist.co.uk/HFS3/EVO/JDM/H3v3-tephra-evoX-JDM.gif



http://www.aquamist.co.uk/HFS3/EVO/JDM/H3v2-tephra-evoX-JDM.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVOX-JDM-BCV.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO9-JDM-MS.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO8MR-JDM-MS.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO8-JDM-MS.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO8-260-JDM-MS.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO7-JDM-MS.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO6-JDM-BCV.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO5-JDM-BCV.gif




http://www.aquamist.co.uk/HFS3/EVO/JDM/H3-EVO4-JDM-BCV.gif

[ziad]

nice pics there richard... will be good help :)

[Richard L]

I will try to make more of theres drawings for other cars. It would be nice if people will post some of imechanical work on the HFS-3 install.

I can't wait for the tephra's ALT-MAP for the EvoX.

[taiman]

great schematic Richard definatley cleared things up for me.
did the basic wiring today, il get started on the ecu tapping by next weekend.

[ziad]

ok thanks Richard the diagrams work 100% for a JDM 8MR, thanks.

[Richard L]

If you have an opportunity to take some pictures of the install if possible.

[daymean]

For the JDM EVO8 MR i am supposed to tap wire 64 for Tephra map switching failsafe, however I am not seeing any wire there...am I supposed to place my own wire there?

[Richard L]

Yes, the slot is empty. I am not sure where you can get the pins form . there is someome on the evom.net selling a pre-wired cable.

Richard

[RS200Z]

Hi Richard, can you post up a diagram for EVO X (EDM/ADM/JDM) with failsafe using Tephra Alt-Map switch via ECU pin 115?

[Richard L]

It is updated, at the top.

[RS200Z]

Richard, sorry, my mistake. It should be pin 112 (5V ADC Map switching) and not pin 115 for EDM/ADM/JDM EVO X. Pin 115 is meant for USDM EVO X. Do you mind updating the diagram again? Thanks.

ps: While you are at it, maybe you can correct the typo error in the diagram as well. You currently have it spelt as MITSUNISHI EVOX ECU instead of MITSUBISHI :)

[Richard L]

Thanks for spotted the mistakes

Please check the updated diagram

[RS200Z]

Thanks Richard. Looks good now!

[RS200Z]

Hi Richard, it's been awhile. Any there any changes to the wiring diagram for HFS-3 v3 for EVO X JDM?

[Richard L]

The v3 wiring for the EVO X JDM is the same as HFS3-V2.

[RS200Z]

Thanks for the confirmation. :)

[Jor-El]

I don't suppose anyone knows the colors of those particular wires?

What are the colors of the wires in pins 18, 45, 92 and 112 of the ecu?

Thanks in advance, this would be a HUGE help.