Shaker666
07-07-2005, 11:49 PM
The car weighs about 3300 lb and the engine is a race-prepped Ford 302 V8 engine. The block is an aftermarket (Dart) 4-bolt main assembly capable of handling 1200 hp. The combo produces 744 fwhp and 600 ft-lbs of torque. Aluminum heads, iron block, forged dish pistons with 8.3:1 CR. The supercharger is an Opcon billet-cased twin-screw unit of 2.2L displacement. I would like to run boost between 15-20 psi. WI or intercooling is a necessity... cost of a WI unit is more affordable at this time in lieu of fabrication costs and time constraints. I have a full programmable engine management system which gives me control over timing curves, A/F ratios, and much more. Which Aquamist system is best suited to this application? Thanks in advance.