Aquamist and BCM Issue
 

BMW M6/F12

My car used to be running on JB4 and the aquamist was working like a charm.

I have recently moved from JB4 to BCM and since then the aquamist is not working at all.

Have anyone else had the same issue, if so please share any solution.

Re: Aquamist and BCM Issue
 

Who is BCM?

Re: Aquamist and BCM Issue
 

Boost Control Modual

Re: Aquamist and BCM Issue
 

BCM this is Boost control modual for burger motor sports..

Re: Aquamist and BCM Issue
 

Can you send a link to BCM?

Re: Aquamist and BCM Issue
 

Re: Aquamist and BCM Issue
 

When you say it is not working, does it mean...
( I did some reading from your link)

1. The aquamist is not spray
2. You are not getting extra boost from the JB4/S2 with BCM
3. Does the latest S2/BCM module support meth at all?

Re: Aquamist and BCM Issue
 

Please post a hi-res picture of the controller board, I like to take a look of the settings.

Re: Aquamist and BCM Issue
 

The HFS4 reads the fuel duty cycle, it should not be affect by the BCM. All it does is to manipulate the boost signal into the ECU. Nowhere near the fuel duty.

It can work independently.