waterinjection.info

waterinjection.info (http://www.aquamist.co.uk/forum2/vbulletin/index.php)
-   Gasoline Forced-Induction (http://www.aquamist.co.uk/forum2/vbulletin/forumdisplay.php?f=17)
-   -   Installation Question (http://www.aquamist.co.uk/forum2/vbulletin/showthread.php?t=397)

turbor850 06-09-2004 11:08 PM
Installation Question
 
Hi, I have just recently purchased my 1S system. I was just pre installing everything and when I put the tube for the water source to the pump (where the orange thing is) it went in and is now stuck, it has just a little play to it, but won't come out. Will this cause any problems ? Will this leak when the pump is pumping water ?

Thanks !

dc96819 08-09-2004 08:18 AM
probably not,

janis 08-09-2004 08:37 AM
Re: Installation Question
 
Quote:
Originally Posted by turbor850
Hi, I have just recently purchased my 1S system. I was just pre installing everything and when I put the tube for the water source to the pump (where the orange thing is) it went in and is now stuck, it has just a little play to it, but won't come out. Will this cause any problems ? Will this leak when the pump is pumping water ?

Thanks !
The side of the pump where the orange thing is is the output, to the injector.

If you push the orange thing down a bit, you can remove the hose.

The play is normal and it probably woun't leak there. Make sure it's pushed in all the way (which isn't far) at final installation

Janis


All times are GMT +1. The time now is 08:03 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.