Re: Mazdaspeed 3
Hey Richard having troubles setting up my failsafe, seems to be spraying with next to no load, my sc is set at 6 bars I think wh is set properly but can't figure out how to set WL proper, how might I delay spray
|
Re: Mazdaspeed 3
Quote:
|
Re: Mazdaspeed 3
I followed the instructions and aet fully counter clockwise still
|
Re: Mazdaspeed 3
Quote:
|
Re: Mazdaspeed 3
Ok so it's not spraying with every blimp of the throttle now but, still can't seem to get the lower failsafe to trip maybe my upper is set too high
|
Re: Mazdaspeed 3
What are the settings for the following:
(face of a clock) THRES ....... ? SC .............? WL ............ ? WH ..........? Let me know. |
Re: Mazdaspeed 3
Thresh 12am
Sc 2am WL 1am WH 11am |
Re: Mazdaspeed 3
One last thing I was checking out the wiring and I am wondering if I set up 2AA wrong, For the wire that needed to be cut I used one posi lock with brown and 2AA connected to one end and white and 2AA to the other is that correct or should use two posi locks? One for brown and one end of 2AA and the other for white and 2AA so there is no more connection for 2AA, thanks Richard
|
Re: Mazdaspeed 3
Have you cut the 2AA wire into two halves?
|
Re: Mazdaspeed 3
Yes I sorted that out now use two posi locks instead of just the one lower limit failsafe is still giving me s hard time tho
|
All times are GMT +1. The time now is 06:34 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.