size of water&temp
Smaller water particle makes more power. :lol: 10% more tested by g-tech.
|
Any more specific data wouldn't go amiss. :cool:
How did you measure the particle sizes anyway? |
Injection tube is 12 mm in diameter. Water is not visible when it exist. Flow rates are 50 to 150 ml per. min for 400hp engine. None turbo 351c . With no timing change. 40 more hp. :shock:
|
Hard to see what sort of particle size we're talking here.
What was the pump pressure and what was the nozzle size? |
size&water temp
1 1/2 psi. 034 nos jet. Injected under carb.
|
1.5 psi is negligible pressure, can you really inject fine mist with that?
Do you mean 1.5bar? (still low though) |
Re: size of water&temp
After 4 more years of BS. Just found out my g-tech under estimates rwhp.
You need the right volume of steam and temps need too be controlled. |
All times are GMT +1. The time now is 06:10 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.