How can you identify each nozzle and how many can you run?
 

I have the 2d system but only the 1s part of it is connected right now. I stuck one nozzle in and it works great. I am up to 20psi on race timing with no knock spraying 100% meth with klotz. My questions are how do you know wich size nozzle you are using? How many nozzles can effectivly be ran ran on one pump?

Two nozzles mate.
Do a search, there are a few relevant threads around here.

We have now a 0.3mm nozzle that flows approximately 75cc/min at 6 bar, one aquamist pump can run four of them and produce excellent atomisation.

The jet has an internal 25 micron filter but still advice you to purchase a main inline 30micron filter down stream of the original 100 micron filter.

It was designed for port injection applications.

aquamist jets
 

Hi Richard whats the part # for the .3 mm aquamist jets I want to run 4 of them in my veh. I want to do a port water injection type of set up. where can I order the jet at I have a hard time finding it on the internet. :lol: