![]() |
#1
|
|||
|
|||
![]()
Hi Richard; need help with jet sizing for Hellcat...HFS-3 with red circuit board...8 x 600cc injectors, 11psi max of boost, 50-50 mix
would 2 x .8mm suffice? or should i go 2 x .9mm and dial it back? and finally what restrictor should i use? .9mm? thanks |
#2
|
|||
|
|||
![]()
I have these jets 1x .8mm , 1 x .9mm and 1 x 1mm...
could I use the .8mm and the .9mm? thanks |
#3
|
|||
|
|||
![]() |
#4
|
|||
|
|||
![]()
What is the maximum duty cycle% of the fuel injector you are using?
__________________
Richard L aquamist technical support |
![]() |
|
|