LIGHT TO SHOW PUMP ON

[Badger]

i whant to have a light to show pump has come on as on aquamist site but they show using a LED can i use a halfords 12volt warning light

[JohnA]

Originally Posted by Badger

i whant to have a light to show pump has come on as on aquamist site but they show using a LED can i use a halfords 12volt warning light

I'd stick to a LED mate, it's bright, small, easy to fit and doesn't burn out.

[janis]

I'm with JohnA, use a LED.

I used a nice blue one (blue = water :lol: ), next to my boost gauge, so I can see exactly when the boost switch is activated.

There's a picture over here:

http://s40concepts.net/forum/index.p...art=0&count=15

Scroll down a bit for a picture with the ignition on.

[Badger]

ok thanks

[JohnA]

yeah, mine is similar :smile:
big blue LED next to the boost gauge. You can see it with the peripheral vision, and also gives you an indication that you've passed that boost threshold

[keithmac]

I used a blue LED from farnells with a 1k inline resistor, I think the bulb will draw too much current and could stop the pump working altogether (it`d ground the trigger wire).