audi exige time for w/m

[duketasos]

Hello first post here

Looking for right aquamist setup for my audi 1.8t 20v exige specs are:

1.8 stroke (oem)
550cc bosch@3bar (but using them at 4bar)
sem manifold
hybrid k04
chargecooled
24 psi

Please advise me for right setup (HFS3-v3), from reading various posts i think that one nozzle at the exit of the chargecooler at 0.9 should be ok...or should i go direct port? then which nozzles should i choose...please advice i'm a bit lost

Kind regards
Tasos