Golf FSI Turbo GTI; Jet placement and 2D setup? UPDATED

[zuoom]

hi Richard,

i installed the 2D system on a supercharged 2ZZGE Celica.

wiring is correct. the FIA2 green light lit up during engine
start/idle. n it flash faster when the throttle is applied.
the red light (water injection) lit up during boost situation, when
more throttle is applied.

when the car is not in gear/not moving. the engine is ok. (as in the
engine would rev smoothly.)

but once in gear/on the move, the engine will bog n the revs will
hestiate at around the 3000rpm mark.

please advise.