Injector pulse Pin 17

[flyingbrick242]

Originally Posted by flyingbrick242

Richard,

If I am following your thoughts:

1-Check for voltage drops between inj+ and fusebox +, this difference might be highier then your limit allows.

2-Take the +12v from the fusebox currently powering up my DDS3 and connect it to my fuel injection ecu switched power.
Is this correct?
Thank You

Richard,

Update to above.

There is a 1.2 voltage drop between the +injector signal from ecu and fusebox cable pin 24
Will there be any advantage taking +15 or switched key voltage from ecu to correct this concern??
It looks like we are too far apart from your desired threshold.
What are your thoughts?
Thank You for your support.