waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 06-07-2009, 09:01 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,941
Default

Quote:
Originally Posted by airboy
The car owner informed me that, from his description, the low level fail safe tripped (level light) even after he removed the subwoofer box from the trunk. If the wires from the Spec-C tank level sensor does not have a good connection (intermittent open) would it trip the fail-safe. I don't know if the sensor is "normally closed" or "normally open".
The sensor is:
- Open circuit when the arm is up (full).
- Cloce circuit when the arm is down (empty).

Two possibilities:
- The activation is not due to tank level but SC, WL and WH calibration, lasts about 4 seconds
- Activation due to tank level last abiout few tenths of second

If the level light flickers, it is due to the water surge of the Spec C tank (most likely) - please find out from your customer, which is which.
__________________
Richard L
aquamist technical support
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.