2005 Porsche Twin Turbo "S" & WI (Proposed)

[ShokWaveRider]

Originally Posted by Richard L

The water pump has a thermal cut out of ~82C. If you put the pump in a hot environment, it will reach the cut out point sooner. I think putting you tank and pump in the front trunk will be ideal.

Thanks, I was hoping to do a little more stealthy install than that. I want to have the car look as stock as possible.

I am going to use the stock tank (7 liters) and hopefully the stock level indicator. It has a switch similar to yours I think I may be able to tap the wires and pass them to the HFS-6 controller, do you think that would work?

I am still looking for a suitable spot for the pump that is out of the way and below the feed from the tank.