|
|
#11
30-09-2009, 09:36 AM
|
|||
|
|||
First of all, mimimise the ground resistance and inductance by using a thicker or shorter gauge wire. Remeasure the wave again by putting the pico probes between the FJO's wire ends.
I still don't understand why the peak and hold is not triggered. Can you ask FJO at what conditions does the "peak and hold" trigger. What is the coil resistance of your fuel injectors and are they paralleled up electrically?
__________________
Richard L aquamist technical support 
|
|
|
Threaded Mode