Check Valve

Originally Posted by Jardon

Hi all,

I have my pump mounted at the same height as the top of my washer bottle. When the water/meth level falls to half way down the bottle I have a problem with the water running back from the pump and therefore a long delay before injection starts. I can see this happening if I observe the pump operating and then switching off. The pump does not act as a check valve but I wondered if the Aquamist check valve would solve the problem - it would be doing the reverse of what it's intended for (stopping siphoning through the pump when the jet is mounted after the throttle body).

Thanks, Huw.

What type and model system are you using?