HFS-4 Q&A, application for your engine...

[monkiboy]

Originally Posted by Richard L

15-20% of 4000cc/min = 600-800cc/minute.
Two 1mm nozzles will achieve the target flow. No restrictor is needed.

Are you looking in the region of 400whp?

thank you, sir.

i am looking to be around 455+whp

why do you ask - any further thoughts or suggestions? possible third 1.0mm jet?

if just the two jets, best location with a FMIC, would be the first cool charged pipe off the core to the TB, correct? perhaps three inches apart along the length of the tube? and 90 or 180 degrees apart along the circumference of the tube for optimal cooling and atomization?

thanks!