HFS-3 failed the driving test ::FIXED::

[TJ]

Originally Posted by Richard L

I must remember to use this method to solve debris probem, thank you.

I was concerned about contaminated methanol. A small trace of hydrocarbon will swell up the FAV's piston seal.

I have heard contaminated methanol in non-factory sealed drums. It appeared some speed shop decaned it into a recycled cannistor (contaminated) and then put a "press-on" seal lid on it.

Be very careful where you get your methanol from.

So far I have used pure methanol from a sealed container but will use your advise for future reference.