Gain setting issue -HFS-3

[leman_opc]

I was able to reconfirm that the controller sees the IDC normally today.

I also managed to get a linear progressive injection by setting the gain trimmer in default 1:1 position.

I can't imagine an easy way to test the pump pressure, but I'm almost 100% sure the meth injection works as supposed.

My original issue with an observed decrease in flow with gain increased was probably due to 100% FAV duty cycle already reached pretty soon on gain trimmer set both 90 degrees cw and 135 degrees cw (so actually almost no difference in these settings) and a occasional flow decrease noted.

Just for my better understanding - could you pls. confirm Richard that I got it right re. max gain setting (x4 to the actual IDC)? I can't find now where I got it from originally...