waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 03-01-2014, 07:06 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,941
Default Re: LSJ Cobalt/Ion Redline ECU pinout

According to the poster, when the solenoid is unplugged, the boost goes up. This is not good. He was a bit vague about what eas unplugged, a hose of electrical connector?

He wrote:

Watch how your boost climbs. When I unplugged one of my connections or lines to the solenoid (dont remember whcih one it was) when I was testing if it was bad, the boost would go to about 10 lbs and then ramp up to 20 within about a second or so when I went WOT. It felt like a car with a small turbo. Also since our cars are not boost referenced for fuel delivery it would go to 10:1 on the wideband for that second or so. Its worth a check

Can you make a bit more sense from above?

Do you have the S/C system on your car at the moment?
__________________
Richard L
aquamist technical support
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.