Injecting prior to turbo comp' impellers

[HYDE16]

Originally Posted by Flr Power

The number of nozzles is irrelevant as long as you do not exceed the flow limit of the pump itself.

I've seen other Aquamist systems with check valves and as high as 7 jets on 1 pump (pre-turbo, post turbo, pre throttle body, four direct port).

Rich what's your take on the following jets at 185psi pump pressure?
Four .6mm CVJs direct port
One .4mm CVJ post intercooler/pre-throttle body
One .3mm solenoid controlled jet pre-turbo