New HFS4 owner with initial setup questions

[Richard L]

Looks perfect to me. I will visit the link today.

Can you check the tiny centre link of the MPS is cut. It looks very close to the blob on the left.

[FI_Rubicon]

Originally Posted by Richard L

Looks perfect to me. I will visit the link today.

Can you check the tiny centre link of the MPS is cut. It looks very close to the blob on the left.

Thanks! After soldering, I cleaned the flux off with a wooden tooth pick and checked the pads for continuity and no continuity with a VOM. Tested good. I cut that small trace out with an exacto knife.

After a couple of tries, I stuck with that blob.