waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 31-10-2004, 02:33 AM
PuntoRex PuntoRex is offline
Senior Member
 
Join Date: Mar 2004
Location: Taiwan
Posts: 75
Default

Dyno is surely good, but too much water can be easily felt.

I'd used 1S system for a couple of years, in some cold winter days, the "summer jet" could be felt obiously. Engine output was clearly softened & faded. Swapped to a smaller jet immediately livened it up.

The other example is once the manifold pressure switch failed, the water was continuously injected (in a rush hour traffic jam) until I could find a place to pull over & unplugged the fuse. I barely managed to do that because when low rpm/off boost/idle, full flow of 0.7mm jet really made the engine stumble. I could only kangarooed along weakly. By this, the water for a whole week was injected within several minutes.

Fortunately there's no permanent damage.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.