waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 27-02-2005, 11:21 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,941
Default

Have you consider outting some methanol in your tank to try out the effect of octane increase by methanol. Since you have a set of high flow injector, mix in the methanol with fuel might just work out perfect.

A/f ratio for gasoline is 15:1 and Methanol is 6:1. If you run 50% methanol mix, you need to up the fuel flow by 30-35% or so. You could end up with an octane value not too far from race fuel.

I am only suggesting since most oxygenated fuel sold at the pumps contains methanol, I think most of the components in the engine should be OK.
__________________
Richard L
aquamist technical support
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.