location and setting for subaru

[hotrod]

The 0.6 mm or a 0.7 mm nozzle is about right for the Subaru.
Most folks are running between 4 and 7 gallon per hour spray rates which is about equal to 240 - 450 cc/min.

Normal install location on the WRX is in the short hose between the intercooler and the throttle body. You might pickup one of the Charged Performance hoses that has the jet holders molded in. A few people have drilled the end tank of the top mount intercooler on the throttle body side and mounted jets there.

Most folks I know are turning on the spray around 10 psi boost.

Larry

[naviuk]

Originally Posted by hotrod

The 0.6 mm or a 0.7 mm nozzle is about right for the Subaru.
Most folks are running between 4 and 7 gallon per hour spray rates which is about equal to 240 - 450 cc/min.

Normal install location on the WRX is in the short hose between the intercooler and the throttle body. You might pickup one of the Charged Performance hoses that has the jet holders molded in. A few people have drilled the end tank of the top mount intercooler on the throttle body side and mounted jets there.

Most folks I know are turning on the spray around 10 psi boost.

Larry

Hi,

I'm busy planning this install for myself, i read above that you can get the hose with molded spot for the aqua mist nozzle, anyone know of a brand or something to search on??