#1
|
|||
|
|||
Ford Mustang GT w/ Paxton 1000RR + CoolingMist W/I
I recently purchased a CoolingMist Deluxe Single Stage Performance Package.
I opted to go with a 150PSI Sur-Flow pump and 3GPH nozzle. Should atomized the water nicely. My question is I will be running water only, mainly to supress detonation/pinging as a safety device. I have a program that adjusts itself on timing via Air Temp, so my tune wouldnt need re-tuning if water is used. However I have thought about using a 15% meth mix so my crappy 91 octane ( I wish i was living in Hungary still 101 octane) to about 95 octane or so....just a small hint of extra fuel. My question is what do you think about my setup? and if that 15/85 mix is a good idea or just stay 100% water? Have you guys had any trouble with injecting water or any mixtures, like adverse effects I have received nothing but great service from David Hill, and his parts are top notch....but i would like to know what you guys think. 2002 4.6L Mustang GT Paxton 1000RR 8-10PSI Long Tube Headers Catted Hi-Flow H-Pipe w/ Spintech Catback 42 lb/hr Injectors Upgrade Fuel Pump SCT chip tune http://coolingmist.com/detailpage.aspx?pid=02P
__________________
02 GT w/ Paxton 1000 |
#2
|
|||
|
|||
also would it be bad to spray before the supercharger or after the supercharger
__________________
02 GT w/ Paxton 1000 |
#3
|
|||
|
|||
If you are running less 10% of water to fuel, it doesn't normally needs a retune.
__________________
Richard L aquamist technical support |
#4
|
|||
|
|||
would a 10% mix of methanol (HEET) would make any difference as far as fuel. all i got here is 91 octane and im trying to get about 93-95 octane yield
__________________
02 GT w/ Paxton 1000 |
#5
|
|||
|
|||
Quote:
http://www.aquamist.co.uk/rescr/faq/additive.html
__________________
Richard L aquamist technical support |
#6
|
|||
|
|||
sorry i meant 10-20% methanol and 80% water mix in my water injection system
__________________
02 GT w/ Paxton 1000 |
|
|