![]() |
#11
|
|||
|
|||
![]()
I have made provison on the prototype to sense the pressure switch of the 1s, when the 1s triggers, it will automatically start the conversion.
I have also made available an extra input to read the DDS3's flow signal (50-450cc/min) so the converter trims the fuel proportiional to water flow. All these facilities are waiting to be tested. I am still a bit tied up at present. The unit has already been made sometime ago but yet to find time to try it. It all work as intended on the beanch. Richard
__________________
Richard L aquamist technical support |
|
|