What kind of set up on a 1000bhp vw engine?

[20vK]

Thanks, JohnA

Naturally, the mapping will start slowly. We'll get it running first and ensure all the usual stuff is working properly, as well as the boost management aspect I have designed. I would hope that no WI is required up to around 450 - 500 bhp, (as friends are achieving with their 20vt engines). If I got the design right, I shouldn't need WI up to around 600bhp.

After that, I think we'll need to cool combustion temperatures to achieve acceptable egt's.

Compression ratio really depends on results. I'll start at around 8.3:1 and see how things go. As you said, we're doing R & D on this new kind of design, so I think it is very much a "suck it and see" kind of approach. You can work with theory, up to a limit, and then all hell breaks loose!

Thanks for your reply,

Rich