waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 28-05-2006, 03:19 PM
awdrocks awdrocks is offline
Junior Member
 
Join Date: May 2006
Posts: 11
Default

I had the same problem with my test last night. I have a roots blower. I like 10cm before the throttle body and the water has to travel through my supercharder first then through my water intercooler... I saw NO drop in inlet temps. Also very disapointed. I live in Cancun and its very humid here, but also hot.

I did the test in nuetral and stationary.

But what you mentioned made sense. The effect will most likey be inside the combustion chamber, therefore the inlet temp senser not reading the lower temps. So my question is. If that the case would it be a good idea to get a EGT Guage to messure your exhaust temps to see if those are dropping conciderably?
__________________
304 Big Bore Longblock By Modular Performance

Car below:

http://forums.explorerx.com/index.ph...CODE=12&CID=44
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:21 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.