Aquamist 2s Install on a Rotary -----> The journey has be

[atl93fd]

JesusCookies,

Woohoo, another rotorhead.

I'm running the aquamist 2d. I installed the pump/resevoir in the back hatch, custom install actually by Gotham Racing. You can view pics @ http://home.comcast.net/~s.stevenpaul . I'm currently running about 14 lbs of boost, slightly more in cold weather. My WI comes on about at about 7 LBS of boost, and I don't notice any drop in intake temps. I have another thread a few down from this, started by atl93fd, you may want to read. I have the LED's directly underneath my headunit location (where many put their turbotimers/profec b.

I'd be interested in hearing your experiences. I'm not tuned for WI, strictly using it for anti-det. I have questions on whether or not I should be noticing a drop inn my intake temps. I think I will try a larger nozzle and turn up the pressure on the pump slightly to see if this works.

My next mod will be HKS twin power, to help prevent against misfire. Stay in touch..

You can do a search on the "other" forum for "pics of my water injection setup" for thread responses.

As far as your questions:

1. I don't know
2. See that internet link, I believe it will answer everything. If not, waterbottle and pump in hatch, LED's below stereo. Nozzle injecting after IC before TB.
3. I don't know anyone who's mapped a 2s to their 13b. Rice Racing and Zero-banger have a lot of experience with different setups.

Good luck and stay in touch!