waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 30-08-2007, 09:17 AM
JohnA JohnA is offline
Senior Member
 
Join Date: Nov 2003
Posts: 352
Default Re: Small CC,Big Boost & Cast Piston's+ W.I

Quote:
Originally Posted by schwitzer turbo
Hey hey all.
Hey :smile:
Quote:
...if running just Water injection how many degree's would my charge temp drop?( i know each engine is differnt but what a Rule of thumb figure?
It mainly depends on what the charge temperature is.
If your intercooling is effective and that temp is usually below 30C then don't expect much temp drop from the W.I.
If your charge temps are very high (say you have no intercooler) then the W.I. effect can be quite dramatic
Quote:
If i Get the Correct percentage of water Injection(ive read its like 10%-20%)Will my Feuling map need to be changed/will the car need tuning when adding just WI?(current map is 100% Rock Solid)
There is no such thing as a universal 'correct percentage'
It all depends on what you are trying to achieve and what your pre-WI engine balance is like.
10-20% water to fuel ratio is used often under full boost to supress detonation that might otherwise occur.
Cylinder distribution is also very important.

Quote:
Will WI improve engine life?
Under certain conditions, YES
If your engine was on the edge of detonation and the WI stops it from damaging itself, then YES
__________________
Cheers,

John

www.max-boost.co.uk
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:41 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.