waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 30-08-2007, 11:42 AM
schwitzer turbo schwitzer turbo is offline
Junior Member
 
Join Date: Aug 2007
Posts: 6
Default Coolers

I do have a Big Intercooler but No Oil Cooler.I have recently Upgraded my Radiator to a Twin pass.
And the Car's Overall temp is Very Gewd/Im very happy with it. and have had all my Coolant/Temp Sensor's Replaced!

But My hood/bonnet Gets FARKing HOT, so hot i cant even Touch the Dip Stick!(it will melt your hand) And i do not have a Blown Headgasket i have had this check Multiple times(chemical test's too) and since i have had her she runs this hot. hence there is a concern.

and the car pulls stronger than ever. heat Gauge never goes over 50% temp is normily at 10-25%
I have Cowled/raised the Rear of the Bonnet as a Atempt to make things run cooler but it hasnt really worked.

If i inject 10% water will my feuling map need to be changed?

So 30C or less after intercooler is very Gewd?

JohnA what you mena by "Cylinder distribution " The way it is Injected?
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:31 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.