cosator
16-04-2004, 05:20 PM
hi !
i am upgrading my 1s-system to a 2d-system in my 1.4l 4-cylinder turbocharged car (cr 9:1 and 1.2-1.3bar boost pressure with bigger turbocharger).
when using the 1s-system i ran a 0,8mm jet right before the throttle body which starts to inject at about 0.7bar.
which jet size shall i use with the 2d-system ?
thanks.
i am upgrading my 1s-system to a 2d-system in my 1.4l 4-cylinder turbocharged car (cr 9:1 and 1.2-1.3bar boost pressure with bigger turbocharger).
when using the 1s-system i ran a 0,8mm jet right before the throttle body which starts to inject at about 0.7bar.
which jet size shall i use with the 2d-system ?
thanks.